5 Models Available
UPSEN (Henan Fangda Industrial) has built tracked mobile crushing, screening and shredding equipment since 2010. The five mobile shredders on this page run from about 15 t/h up to 200 t/h (by material) and use low-speed, high-torque twin-shaft cutting to reduce difficult feed into recyclable fractions: C&D waste, wood and biomass, scrap metal and end-of-life vehicles, municipal solid waste and tyres.
Every unit is self-propelled on tracks, operated by a single wireless remote control, and available with magnetic separation to pull ferrous metal from the output. Choose diesel power (Cummins) for remote sites or the electric-drive UFS750 for indoor and emission-sensitive work. Combined with our crushers, screeners and conveyors, they form complete recycling lines delivered to 80+ countries with CE certification and OEM parts support.
Tell us your feed material and target output size — we recommend the right machine and screen configuration.
Ask Carlsen on WhatsAppShredders and crushers are different tools for different feed. Shredding cuts tough, mixed and metal-bearing material; crushing breaks hard rock and concrete into aggregate. UPSEN builds both, so the choice is about your material, not about what we sell.
Low-speed, high-torque twin-shaft cutting that tears and shears feed rather than impacting it — ideal for material a crusher cannot take.
Compression (jaw) or high-speed impact breaking of rock and concrete into reusable aggregate fractions.
1
Metal, tyres, wood or mixed refuse?
You need volume reduction before sorting → shredder.
2
Hard rock or concrete aggregate?
Natural stone, slabs, rebar concrete → crusher.
3
Building a full line?
Shred or crush → screen into fractions → convey to stockpile — all UPSEN tracked units.
4
Indoor or low-emission site?
Choose the electric-drive UFS750 instead of a diesel unit.
Send photos of your feed and your target output to Carlsen on WhatsApp +86 15333827088 — we will match the machine and the screen configuration to the job.
Typical feed, the recommended starting model and its rated range. Final selection depends on your material, moisture and the output size you need — our engineers confirm the configuration before you order.
| Application / Feed | Recommended Models | Capacity Range | Typical Setup |
|---|---|---|---|
| Wood waste, green waste, biomass | UMS250 / UTS250 | 15-20 t/h | Same twin-shaft platform (tracked / towable) |
| C&D debris & bulky refuse | UMS250 / UTS250 / UMS750 | 80-150 t/h | + magnetic separator option |
| MSW & commercial waste | UMS250 / UTS250 | 15-25 t/h | Volume reduction before sorting |
| Scrap metal & end-of-life vehicles | UMS750 / UMS950 | 15-30 t/h | UMS950 = scrap-car shredder |
| Indoor / emission-sensitive sites | UFS750 | 20-150 t/h | Electric drive, 110 kW |
A mobile shredding plant pairs the shredder with a mobile conveyor for discharge, so shredded C&D waste, wood or scrap metal is stockpiled directly instead of being handled twice. Where the output has to meet a size specification, a mobile screener is added after the shredder and the oversize is returned to it.
Also described as a portable shredding plant or a mobile shredder plant. Because shredding is often the first stage of C&D waste recycling, it is frequently combined with a mobile crusher for the hard fraction and a mobile screener for the fines.
Mobile Crusher & Crushing Plant · Mobile Screener · Mobile Conveyor & Stacker
Answers to the questions recyclers ask most before buying a tracked mobile shredder.
Price depends on the model, engine (diesel or electric) and the screen configuration you need. Contact Carlsen Wang (WhatsApp +86 15333827088 or 15333827088@163.com) with your feed material and target output, and we will send a tailored quotation for the right model.
The UMS / UTS / UFS range is built for C&D waste, wood and biomass, scrap metal and end-of-life vehicles, municipal solid waste and tyres. Tell us your feed and we will confirm the correct cutter and screen configuration for it.
Yes — the UMS950 is our tracked scrap-car shredder, and the larger UMS750 handles high-volume metal feed. A magnetic separator removes the liberated ferrous fraction, which is the first step of any metal recycling line. Very heavy structural steel sections should be pre-cut before feeding.
If your goal is aggregate from hard rock or concrete, choose a crusher. If your feed is tough, mixed or metal-bearing waste that needs volume reduction before sorting, choose a shredder. Many recycling yards run both in one line — see the comparison above and our crusher range.
Diesel units (Cummins-powered) are fully self-contained for remote and mobile sites. The UFS750 runs on a 110 kW electric drive — lower running cost and emissions, ideal for indoor, urban or emission-sensitive operations with a power supply on site.
Output size is set by the screen and cutter configuration of the shredder. Tell us the fraction you need and our engineers will specify the right setup — and confirm the realistic throughput for your material before you order.
Hard rock and concrete call for crushing; tough, mixed waste calls for shredding. See the comparison.
Compare the options →35 pages covering all crushers, shredders, screeners and conveyors with specifications.
Download catalogue →Send us photos of your waste stream and daily tonnage — get a tailored model recommendation.
Chat on WhatsApp →Tell us your project · We respond within 24 hours
Quality & compliance: ISO 9001:2015 quality management · EU conformity documentation verified by three independent bodies · EN ISO 3744:2010 noise tested, LWA 91 dB(A)
